This is an image carousel with thumbnail navigation. Select any thumbnail to view an enlarged version in a gallery modal. In the gallery, use the Next and Previous buttons to navigate between images, or close the modal to return to the thumbnails.

CADEX Aero Integrated Handlebar

OFF THE FRONT

From scorching attacks to all-out sprints, this wind-slicing one-piece bar and stem is designed for competitive riders looking to break away from the pack. The flattened tops reduce frontal surface area for those moments when you’re tucked deep and charging hard. A shallow 125mm drop and long 80mm reach reinforce an aero position and make transitions with your hand positions smooth and easy.
Current price:

Χαρακτηριστικα

  • Integrated bar-and-stem construction and internal cable routing for improved
    aerodynamic performance.
  • One-piece, no-bond manufacturing on the drops, hoods and tops utilizes high-
    grade carbon fiber and CADEX precision layup technique to eliminate the added
    weight and flex found in traditionally bonded bars.
  • Flattened tops improve aerodynamic efficiency.
  • 80mm reach and narrow width at the hoods for natural aero positioning.
  • T800 and T1100 carbon fiber keeps weight low without compromising strength or
    stiffness.
  • Shallow drop makes transitions between hoods and drops fast and easy.
  • 3-degree flare delivers enhanced control when descending, cornering and
    sprinting.
  • 2-degree backsweep and gently curved ramps provide better grip and support
    during long rides.
  • Shimano Di2 satellite shifter compatible.
  • Out-front computer mount.
  • Compatible with 1-1/4”, 1-1/8” and OverDrive Aero steerer tubes with included
    carbon shims.

Specifications

Material: Carbon
Stem Angle: -10 degrees
Stem Clamp: 1 1/4” / 1 1/8” / OverDrive Aero (with carbon shim)
Stem Length: 80 / 90 / 100 / 110 / 120 / 130 / 140mm
Width (Hood to Hood): 340 / 360 / 380 / 400 / 420mm
Width: (Drop to Drop) 360 / 380 / 400 / 420 / 440mm
Drop: 125mm
Reach: 80mm (72mm for 360mm bar)
Flare: 3 degrees
Backsweep: 2 degrees
Weight: 325g (420mm x 100mm bar)
Included Accessories: 1 1/8” spacer, OverDrive Aero spacer, 2021-2024 1 1/4" TCR Spacer, 1 1/4" 2020-2023 Propel spacer, OverDrive Aero shim 1 1/4” to 1/8” shim, CADEX out-front computer mount
Intended Usage

Gallery

Selecting any of the image buttons will open a larger image gallery with image descriptions

Technologies

Κατασκευή One Piece

Η μονοκόμματη κατασκευή (καλούπι) χρησιμοποιεί ανθρακονήματα υψηλής ποιότητας και μια τεχνική διάταξης ακριβείας που είναι παρόμοια με τη διαδικασία που χρησιμοποιείται για τη δημιουργία των τροχών CADEX. Το αποτέλεσμα είναι ένα εξαιρετικά ισχυρό τιμόνι με άμεση απόκριση και το καλύτερο βάρος στην κατηγορία του.

Στρώσεις carbon CADEX

Οι τροχοί CADEX κατασκευάζονται με στρώσεις και διάταξη υψηλής ακρίβειας τοποθετώντας ίνες άνθρακα υψηλής ποιότητας και αντοχής μόνο εκεί που χρειάζεται, δημιουργώντας μια ισχυρή, άκαμπτη δομή με ελάχιστο βάρος.

Όλες οι προδιαγραφές είναι δυνατό να αλλάξουν χωρίς πρότερη ειδοποίηση