Tehnologije
Oglejte si tehnologije CADEX
Technologies
Advanced Forged Composite Technology
Vrhunski postopek visokotlačnega oblikovanja, ki se uporablja za izdelavo sestavnih delov ogljikovih vlaken, ustvarja edinstven dvodelni okvir sedla, ki zagotavlja popolno ravnovesje podpore in udobja.
Aero Carbon Spoke
Namensko oblikovana oblika aero ponuja odlične aerodinamične lastnosti, vrhunsko stabilnost pri premikanju vetrov in najlažjo možno težo.
CADEX Ceramic Bearings
Durable, ultra-hard ceramic bearings further increase hub rolling efficiency with lower rolling resistance and 1.5x smoother action than steel bearings.
Hookless Rim Design
Omogoča najboljši prehod pretoka iz pnevmatike na stransko steno platišča, kar ima za posledico zmanjšano aerodinamično izgubo v primerjavi s standardnimi platišči kljuke, poleg tega pa ima neprekinjeno strukturo iz ogljikovih vlaken, ki povečuje splošno trajnost.
CADEX Integrated-Axle Front Hub
An integrated front hub design reinforces axle support and eliminates play by replacing the standard end cap, bearing and bushing interface with an integrated axle running the length of the hub. This increases thru-axle support and boosts the lateral stiffness of the entire structure.
CADEX Precision Reinforced Layup
CADEX precision reinforced layup places high tensile strength carbon fiber only where needed, creating a strong, stiff structure at minimal weight.
CADEX R-Drive Freehub System
With anodized hub internals to enhance durability and a redesigned anti-dust cover for maximum longevity, the R-Drive Freehub System offers a high-engagement ratchet and optimized flat spring design for immediate, efficient power transmission and uncompromising reliability.
Custom-Tuned DBL Technology
Dinamično uravnoteženo vezanje zagotavlja, da so napere nastavljene za optimalno napetost, kadar so pod dinamično silo pedaliranja v primerjavi s statičnimi, kar ima za posledico vrhunsko togost in učinkovitost prenosa.
Exclusive Sync Ergonomics Components
CADEX-exclusive Sync Ergonomic components including arm rests, extensions and grips provide body, arm and high-hand support while allowing the rider to stay in the aero racing position over long hours.
Integrated Rail Design
Razbremeni tlačne točke, tako da se na tleh, ki niso kontaktne točke za kolesarje, postavijo povezave tirnice na os. Oblika pomaga tudi pri razbremenitvi vibracij na cesti, z odstranitvijo prekrivajočega se območja sklepov, ki se običajno nahaja na sedlih, se izognemo nepotrebni teži.
Low-Friction Hub
Natančno obdelani notranji deli odstranijo prekomerno obremenitev ležajev, zmanjšajo trenje ležajev in zmanjšajo kotalni upor.
Integrated Hub Design
One-piece aero hub and spoke design, where CADEX Super Aero Carbon Spokes are seamlessly bonded straight into the aero hub flange, forming a one-piece structure with the hub. This integrated configuration hides the nipples into the rim, while ensuring independent tension tuneability.
CADEX One Piece Mold Manufacturing
One-piece, no-bond manufacturing utilizes high-grade carbon fiber and CADEX precision layup technique to eliminate the added weight and flex found in traditionally bonded bars.
Optimal Air Transition
21 mm notranje platišče zagotavlja neprimerljivo aerodinamiko z optimalnim prehodom zraka s stranske stene pnevmatike na kolo.
Lightweight Reactive Foam
Developed especially for use in CADEX saddles, this high-density EVA foam combines a durable lightweight structure with maximum rebound and vibration dampening characteristics.
Particle Flow Technology
Prosto pretočni delci ETPU, specifični za CADEX, strateško nameščeni v dva ločena žepa na območju stika, oblikujejo v edinstveno stanje medenice kolesarja. To olajša tlačne točke in ta pritisk porazdeli po širšem območju stika za čednejšo in udobnejšo vožnjo.
Precision Reinforced Lay-Up
Ogljikova vlakna z visoko natezno trdnostjo in visoka Tg smola so okrepljena na najpomembnejših točkah za togost vodenja v industriji, skladnost vožnje in trdnost brez nepotrebne teže.
CADEX R3-C40 Aero Hub
Aero optimized hub features 3rd generation CADEX Low-Friction internals with CADEX ceramic bearings and 40-tooth ratchet engagement.
CADEX R3-C48 Aero Hub
Precision machined 48 tooth ratchet hub with CADEX Ratchet Wave Spring offers ultra-fast engagement, reduces aerodynamic loss and virtually eliminates bearing load as ultra-smooth, low-rolling resistance CADEX ceramic bearings further reduce watt loss.
Race-Ready Integration
The unique chassis of the CADEX Tri frameset—a massive down tube with no top tube—included in the upper section of the down tube allows the rider to quickly and easily access nutrition while remaining in the most optimized riding position.
Race Shield Puncture Protection
Z ekskluzivnim ultralahkim in odpornim kevlar materialom, vgrajenim v ohišje, Race Shield zagotavlja vrhunsko zaščito pred prebijanjem, ne da bi pri tem ogrožali hitrost ali občutek na cesti.
Race Shield+ Puncture Protection
With an exclusive, ultra-lightweight and cut-resistant Kevlar material over the tire casing, Race Shield + provides 34% more puncture protection than our original Race Shield, with little sacrifice in acceleration and road feel.
In-mold Carbon Surface Graphic Technology
Advanced carbon molding technology allows fine rim surface finishing treatment directly within the mold, elminating the need for additional carbon treatment or decals.
RR-S AR Compound
Based on the original fast-rolling RR-S compound, the RR-S AR compound keeps the speed but adds more grip and increased durability for maximum confidence on rough and wet roads.
RR-S Compound
Vrhunska spojina s pnevmatikami na osnovi kremena za elitne kolesarje, ki zahtevajo izjemno hitrost in oprijem. V primerjavi s standardno zmesjo za cestne pnevmatike ima RR-S bistveno manjši kotalni upor in se ponaša z občutno večjim oprijemom pri zavijanju, zlasti na mokrem.
240 TPI Supple Race Casing
240TPI Supple Race Casing strategically places layers only where needed, ensuring an exceptionally supple and comfortable ride. This design optimizes rolling efficiency, all while maintaining an impressively low weight.
CADEX Super Aero Carbon Spokes
Ultra-lightweight high tensile-strength CADEX aero carbon spokes minimize lateral flex for more efficient acceleration and climbing and feature a purpose designed aero shape offering class-leading aerodynamic characteristics as well as superior stability in shifting winds.
Supple Race Casing (SRC)
Single-layer Supple Race Casing (SRC) delivers an incredibly supple and comfortable ride with superior rolling efficiency at a super low weight.
Ultralight Carbon Composite
Ustvari togo strukturo aero platišč pri izjemno majhni teži za neprimerljivo pospeševanje in hitrost.
Versatile Contact Position (VCP) Drops
8- degree flare with 3-degree outsweep, plus extended 40mm tails for maximum stability and control in all riding conditions.